Everpert Drip Irrigation Kit Fog Nozzles Automatic Watering Irrigation System(10m) - B07CVJY796

  • Model: B07CVJY796
  • 536 Units in Stock

£40.86  £15.05
Save: 63% off

Add to Cart:
Everpert Drip Irrigation Kit Fog Nozzles Automatic Watering Irrigation System(10m) - B07CVJY796
   Rated 4.74   reviews [234]

  • The fine atomizing nozzle uses a brass body with a stainless steel core guide vane.

  • The liquid forms a centrifugal vortex in the guide vane. Fine hollow mist particles are sprayed from the nozzle holes, which can be widely used in humidification,cooling, disinfection, dust reduction, landscaping, salt fog test and other artificial fog of factory buildings.

  • The hole diameter is 0.3 mm and the production process is excellent. The cost is more than 10 times less compared to gas humidification. Easy to install, good water-saving performance.

  • This series of nozzles do not require air assistance, the system is simple. The sprayed fog is fine, the atomization is sufficient, energy saving and water saving, the cost is low, and the effect is good.

  • The stainless steel spray film is processed by the advanced forging and pressing, and strong durability,its lifetime is 2.5 times than the similar nozzles. This nozzle can fully utilize the pressure of tap water for atomization. Use of a high-pressure pump is more effective.

  • Colour Name:1

    Specifications:
    Length: 10m/32.81 ft, 15m/49.21 ft, 25m/82.02 ft
    Material: plastic
    Packing method: OPP bag packing
    Application scope:Agriculture, lawns, villas, industrial irrigation, green belt irrigation, dehumidification.

    Installation Steps:
    1. It is recommended to install the atomization system at a height of 2.5m-3m/8.20-9.84 ft.
    2. Connect the adapter to the faucet.
    3. Open the faucet and clean system for 1 minute to remove impurities.
    4. The spray nozzle is screwed onto the tee fitting except for the one nozzle at the end.
    5. Open the faucet and clean system for 2 minutes to ensure that the system is completely cleaned.
    6. Close the water and install the last nozzle on the fitting and use the end plug.
    7. Fixed the atomizing pipe by the cable strap and saddle clip.
    8. Turn on the faucet until the sprayer works and enjoy cooling cooling atomization system.
    9. When not using the atomization system for a long time, close the nozzle and keep it dry and clean.

    Package included:
    1 X 4/7 Hose
    1 X Inner Threaded Faucet Connector
    1 X 4 Universal Joint of Copper Wire
    1 X 4/7 Connector
    9 X 4/7 Tees
    10 X Copper Sprinklers

    Everpert Drip Irrigation Kit Fog Nozzles Automatic Watering Irrigation System(10m) - B07CVJY796


    B07CQZ8Z7NB07G4TL6GT
    Copyright © 2012-2018 oldmoviesandkillerheels.co.uk. Powered by Professional THRU WALL Outside Garden Tap Kit meets Water Regulations GT1 DIY,Kenyr Ebony pipe dark wooden manual pipe acrylic bent handle smoking set O.
    button-top.png